logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1220B)

    

  1. # pica40
  3. ![pica40](https://i.imgur.com/CKImjAPh.jpg)
  5. A family of 40-key split ortholinear keyboards with rotary encoder.
  7. -   Keyboard Maintainer: [zzeneg](https://github.com/zzeneg)
  8. -   Hardware Supported: Pica40 PCBs, Pro Micro (rev1), XIAO RP2040/nRF52840 (rev2)
  9. -   Hardware Availability: [GitHub](https://github.com/zzeneg/pica40)
  11. Make example for this keyboard (after setting up your build environment):
  13.     make pica40:default
  14.     make pica40/rev1:default
  16. Flashing example for this keyboard:
  18.     make pica40:default:flash
  19.     make pica40/rev1:default:flash
  21. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  23. ## Bootloader
  25. Enter the bootloader in 3 ways:
  27. -   **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  28. -   **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
  29. -   **Keycode in layout**: Press the key mapped to `RESET` if it is available