logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1334B)

    

  1. # Piantor UV 44
  3. ![Piantor UV 44](https://i.ibb.co/QvJM1GR/20240806-PIANTORUV44-00.png)
  5. PiantorUV44 is a Piantor/Cantor fork with Raspberry Pi Pico, hybrid hotswap socket and soldered-in switches support and flippable PCB.
  7. * Keyboard Maintainer: [azhizhinov](https://github.com/azhizhinov)
  8. * Hardware Supported: RP2040
  9. * Hardware Availability: https://github.com/azhizhinov/PIANTORUV44
  11. Make example for this keyboard (after setting up your build environment):
  13.     make piantoruv44:default
  15. Flashing example for this keyboard:
  17.     make piantoruv44:default:flash
  19. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  21. ## Bootloader
  23. Enter the bootloader in 2 ways:
  25. * **Physical reset button**: Hold the `BOOT` button on the Pico and press the `RST` button on the Pico, release the the `RST` button before the `BOOT` button.
  26. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
  27. Once you enter the bootloader, the keyboard will show up as a USB device on your computer, you could drag and drop a firmware file to flash it, but I recommend using the flash commands for the respective side.