logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1177B)

    

  1. # phdesign/ph60/multi
  3. ![PromoImage](https://i.imgur.com/sUwC9mk.jpg)
  5. A 60% multi-layout supported keyboard PCB with open source keyboard case.
  7. * Keyboard Maintainer: [Team PHDesign](https://github.com/ph-design)
  8. * Hardware Supported: PH60/Multi PCB
  9. * Hardware Availability: 
  10.   - Store: https://e.tb.cn/h.6VMjUgWZkUGwq26?tk=oVyAeD6uPS2
  11.   - GitHub Repo: https://github.com/ph-design/PH60/tree/Rev.2/PCB_Rev2/Multi
  13. Make example for this keyboard (after setting up your build environment):
  15.     make phdesign/ph60/multi:default
  17. Flashing example for this keyboard:
  19.     make phdesign/ph60/multi:default:flash
  21. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  23. ## Bootloader
  25. Enter the bootloader in 3 ways:
  27. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  28. * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead