logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1601B)

    

  1. # Slimdash
  3. ![mzmkb/slimdash/rev1](https://i.imgur.com/ymf8ROw.jpeg)
  5. __SlimDash__ is a slim low profile split ortho-staggered keyboard inspired by omkbd/ErgoDash
  6. with following key highlights:
  8. * Ortho-Staggered Split keyboard layout
  9. * Slim body (20-22mm depending on key caps and rubber feet used)
  10. * Rigid body structure
  11. * Per-Key RGB LED Matrix lighting
  12. * USB-C connector
  13. * Easy build utilizing PCBA service for the harder SMT components
  14. * Keyboard Maintainer: [mizma](https://github.com/mizma)
  15. * Hardware Supported: [SlimDash](https://github.com/mizma/SlimDash/)
  16. * Hardware Availability: Build your own using design data at [SlimDash](https://github.com/mizma/SlimDash/)
  18. Make example for this keyboard (after setting up your build environment):
  20.     make mzmkb/slimdash/rev1:default
  22. Flashing example for this keyboard:
  24.     make mzmkb/slimdash/rev1:default:flash
  26. You may also enter Bootloader on your keyboard, and copy the `mzmkb_slimdash_*_*.uf2`
  27. file into the `RPI-RP2` drive shown in your PC.
  29. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools)
  30. and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide)
  31. for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  33. ## Bootloader
  35. Enter the bootloader in 3 ways:
  37. * __Reset button__: Double-tap the RESET button on the side of the keyboard near
  38.   TRRS jack.
  39. * __Physical reset button__: Hold BOOT_SW and press RESET on the side of the keyboard
  40.   near TRRS jack.
  41. * __Keycode in layout__: Press the key mapped to `QK_BOOT` if it is available