logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1196B)

    

  1. # ms_sculpt
  3. ![ms_sculpt_with_cold_dry_joints](https://user-images.githubusercontent.com/105235786/168012266-4e235bf5-8d34-4731-ab17-2308a9d9a29e.jpg)
  5. MS Sculpt Keyboard ISO-layout wired to STM32F401 / blackpill
  7. * Keyboard Maintainer: [Jean Bernard](https://github.com/jn-bernard)
  8. * Hardware Supported: MS Sculpt Keyboard ISO-layout, STM32F401
  9. * Hardware Availability: Ebay
  11. Make example for this keyboard (after setting up your build environment):
  13.     make ms_sculpt:default
  15. Flashing example for this keyboard:
  17.     make ms_sculpt:default:flash
  19. ## Bootloader
  21. Enter the bootloader in 3 ways:
  23. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  24. * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
  25. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
  27. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).