logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1112B)

    

  1. # Palmetto PCB
  3. Palmetto PCB from Montsinger (https://i.imgur.com/VmmAW97.jpeg)
  5. * Keyboard Maintainer: [Ross Montsinger](https://github.com/rossman360)
  6. * Hardware Supported: RP2040
  7. * Hardware Availability: [Carolina Mech](https://carolinamech.com)
  10. Make example for this keyboard (after setting up your build environment):
  12.     make montsinger/palmetto:default
  13.     
  14. Flashing example for this keyboard:
  16.     make montsinger/palmetto:default:flash
  18. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  20. ## Bootloader
  22. Enter the bootloader in 3 ways:
  24. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  25. * **Physical reset button**: Hold the "BOOTMODE" button on the back of the PCB and briefly press the "RESET" button on the back of the PCB
  26. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available