logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1792B)

    

  1. # Mode Eighty V2 PCB QMK firmware
  3. ![MODE80](https://i.imgur.com/26uzM3yl.jpg)\
  4. [Image Gallery](https://imgur.com/t/mechanicalkeyboards/8Uf6c2m?nc=1)
  6. The Mode80 is a tenkeyless high-end keyboard sold by [Mode Designs](https://shop.modedesigns.com/).
  8. * Keyboard Maintainer: [Gondolindrim](https://github.com/gondolindrim)
  9. * Hardware Supported: proprietary PCB using STM32F072 controller
  10. * Hardware Availability: you can get a Mode Eighty as of today (dec. 2021) through the in stock sales or special groupbuy editions at https://shop.modedesigns.com/
  12. ## How to flash
  14. ### Enter bootloader
  16. The DFU state in the bootloader can be accessed in 3 ways:
  18. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  19. * **Physical reset button**: press the button on the front of the PCB, next to caps lock, for at least five seconds
  20. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available (ESC key at layer 1 in the default layout)
  22. ## Compile firmware
  24. After accessing the DFU state in your PCB, build the default layout using:
  26.     make mode/m80v2/m80v2h:default # Hotswap
  27.     make mode/m80v2/m80v2s:default # Soldered
  29. Then download the resulting binary `*bin` file using `dfu-util` or QMK Toolbox.
  31. ## Compile and flash
  33. After accessing the DFU state in your PCB, you can compile-and-flash automatically usind `dfu-util` through
  35.     make mode/m80v2/m80v2h:default:flash # Hotswap
  36.     make mode/m80v2/m80v2s:default:flash # Soldered
  38. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).