logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1292B)

    

  1. # PuckBuddy
  3. ![PuckBuddy](https://i.imgur.com/iSVAHJzh.png)
  5. A macropad with a Cirque Glidepoint Trackpad in the middle, powered by the STM32 Blackpill.
  7. * Keyboard Maintainer: [Kyle McCreery](https://github.com/kylemccreery)
  8. * Hardware Supported: PuckBuddy v1.0
  9. * Hardware Availability: [PuckBuddy on MechWild](https://mechwild.com/product/puckbuddy/)
  11. Make example for this keyboard (after setting up your build environment):
  13.     make mechwild/puckbuddy:default
  15. Flashing example for this keyboard:
  17.     make mechwild/puckbuddy:default:flash
  19. ## Bootloader
  21. Enter the bootloader in 3 ways:
  23. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (assigned to the top left key) and plug in the keyboard while holding it.
  24. * **Physical reset button**: Press and hold the boot0 button on the blackpill, tap  and release the nrst button on the blackpill, then release the boot0 button.
  25. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. By default this is the top right key on layer 1.
  27. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).