qmk_firmware

readme.md (866B)

# Clunker
![clunker](https://i.imgur.com/6X5ijDoh.jpg)
The Clunker is a 40% DIY kit with a knob and solenoid.
* Keyboard Maintainer: [Kyle McCreery](https://github.com/kylemccreery)
* Hardware Supported: Clunker v1.3
* Hardware Availability: [Clunker on MechWild](https://mechwild.com/product/clunker/)
Make example for this keyboard (after setting up your build environment):
    make mechwild/clunker:default
Flashing example for this keyboard:
    make mechwild/clunker:default:flash
## Bootloader
Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the top of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available