logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1224B)

    

  1. # Cor65
  3. ![Cor65](https://i.imgur.com/5sJfXDWl.jpeg)
  5. A Cor65 keyboard PCB, base on Zed65.
  7. * Keyboard Maintainer: [Mechlovin' Studio](https://github.com/mechlovin)
  8. * Hardware Supported: Zed65, APM32F103
  9. * Hardware Availability: [GB](https://www.reddit.com/r/mechmarket/comments/xgb5nx/gb_saevus_cor_65_split_xt_keyboard/)
  11. Make example for this keyboard (after setting up your build environment):
  13.     make mechlovin/zed65/no_backlight/cor65:default
  15. Flashing example for this keyboard:
  17.     make mechlovin/zed65/no_backlight/cor65:default:flash
  19. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  21. ## Bootloader
  23. Enter the bootloader in 4 ways:
  25. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (Escape) and plug in the keyboard
  26. * **Bootloader reset**: Hold down the key at (14,0) in the matrix (Backspace) and plug in the keyboard
  27. * **Physical reset button**: Briefly press the button on the back of the PCB
  28. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available