logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1181B)

    

  1. # hex4b
  3. ![hex4b](https://i.imgur.com/lArfGgHh.jpeg)
  5. A PCB for HEX.4B 75% keyboard.
  7. * Keyboard Maintainer: [Mechlovin' Studio](https://github.com/mechlovin)
  8. * Hardware Supported: Hex.4B Rev.2 PCB, APM32F103CBT6
  9. * Hardware Availability: [Hex Keyboard](https://hexkeyboards.com/)
  11. Make example for this keyboard (after setting up your build environment):
  13.     make mechlovin/hex4b/rev2:default
  15. Flashing example for this keyboard:
  17.     make mechlovin/hex4b/rev2:default:flash
  19. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  21. ## Bootloader
  23. Enter the bootloader in 3 ways:
  25. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  26. * **Bootloader reset**: Hold down the key at (0,13) in the matrix (Backspace) and plug in the keyboard
  27. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
  28. * **Hardware reset**: Press reset button (located on the top side of the PCB)