logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1039B)

    

  1. # MadJax Macropad
  3. * Keyboard Maintainer: [Guido Bartolucci](https://github.com/guidoism)
  4. * Hardware Supported: Seeed Studio XIAO RP2040
  5. * Hardware Availability: https://github.com/guidoism/madjax_macropad
  7. Make example for this keyboard (after setting up your build environment):
  9.     make madjax_macropad:default
  11. Flashing example for this keyboard:
  13.     make madjax_macropad:default:flash
  15. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  17. ## Bootloader
  19. Enter the bootloader in 3 ways:
  21. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  22. * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
  23. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available