logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1160B)

    

  1. # macrocat
  3. ![macrocat](https://i.imgur.com/ItLHGBfh.jpg)
  5. A cat like macro keyboard/numpad.
  7. * Keyboard Maintainer: [catmunch](https://github.com/catmunch), [starcatmeow](https://github.com/starcatmeow)
  8. * Hardware Supported: Fully Supported
  9. * Hardware Availability: [MacroCat Keyboard](https://github.com/catmunch/macrocat)
  11. Make example for this keyboard (after setting up your build environment):
  13.     make macrocat:default
  15. Flashing example for this keyboard:
  17.     make macrocat:default:flash
  19. ## Bootloader
  21. Enter the bootloader in 3 ways:
  23. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  24. * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
  25. * **Brand new atmega32u4 chip**: Plug the cable in, it will automatically boot into bootloader
  27. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).