logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1231B)

    

  1. # Lily58 Lite Rev3
  3. ![lily58_lite](https://i.imgur.com/RCx5Xym.jpeg)
  4. ![lily58_lite_rev3_pcb](https://i.imgur.com/rIjVjCE.png)
  7. * Keyboard Maintainer: [yuchi](https://github.com/kata0510)
  8. * Hardware Supported: RP2040-Zero
  9. * Hardware Availability: [PCB Link](https://github.com/kata0510/Lily58/tree/master/Lite_Rev3)
  10. * Other Information(ja) [Link](https://docs.liliums.net/lily58-lite-rev3/about/)
  12. Make example for this keyboard (after setting up your build environment):
  14.     make lily58/lite_rev3:default
  16. Flashing example for this keyboard:
  18.     make lily58/lite_rev3:default:flash
  20. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  22. ## Bootloader
  24. Enter the bootloader in 3 ways:
  26. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  27. * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
  28. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available