logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1613B)

    

  1. # Raindrop
  3. ![stacked](https://i.imgur.com/R2iPqjIh.png)  
  4. *Casing*  
  5. ![PCB Front](https://i.imgur.com/00TpL3nh.png)  
  6. *PCB Front*  
  8. 60% sized keyboard with a gasket mounted plate and aluminium case, made by Laneware Peripherals.
  10. * Keyboard Maintainer: [Laneware Peripherals](https://github.com/laneware)
  11. * Hardware Supported: Raindrop PCB
  12. * Hardware Availability: Group Buy
  14. ## Layouts
  15. The Raindrop PCB can be configured in the following key layouts: 
  16. | Key Layout | Keymap | Diagram |
  17. | :---: | :---: | :---: |
  18. | Standard 60% | default | ![diagram_ansi](https://i.imgur.com/oibG44o.png) |
  19. | 2u Left Shift with Arrow Keys | arrows | ![diagram_arrows](https://i.imgur.com/cQ4Kwb5h.png) |
  20. | HHKB with 6.25 Spacebar | hhkb | ![diagram_hhkb](https://i.imgur.com/WU6gb1Qh.png) |
  22. Make example for this keyboard (after setting up your build environment):
  24.     make laneware/raindrop:default
  26. Flashing example for this keyboard:
  28.     make laneware/raindrop:default:flash
  30. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  32. ## Bootloader
  34. Enter the bootloader in 3 ways:
  36. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  37. * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
  38. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available