logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1305B)

    

  1. # BM980HSRGB
  3. ![BM980HSRGB](https://i.imgur.com/k4NQGLxh.jpeg)
  5. A 1800, hotswap, in switch RGB keyboard from KPRepublic.
  7. * Keyboard Maintainer: [peepeetee](https://github.com/peepeetee)
  8. * Hardware Supported: BM980HSRGB
  9. * Hardware Availability:
  10.   * https://kprepublic.com/products/bm980rgb-bm980-rgb-hot-swappable-custom-mechanical-keyboard-pcb-programmed-qmk-via-firmware-full-rgb-switch-underglow-type-c
  11.   * https://www.aliexpress.com/item/1005002509519466.html
  12.   * https://item.taobao.com/item.htm?id=645862298692
  14. Make example for this keyboard (after setting up your build environment):
  16.     make kprepublic/bm980hsrgb:default
  18. Flashing example for this keyboard:
  20.     make kprepublic/bm980hsrgb:default:flash
  22. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  24. ## Bootloader
  26. Enter the bootloader in one of 3 ways:
  28. * Short the two-pad footprint beneath the f12 key while the board is plugged in
  29. * Press the switch labled RST on the back of the PCB, near the MCU, while the board is plugged in
  30. * Hold the Esc key while connecting the USB cable (also erases persistent settings)