logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1447B)

    

  1. # BM80HSRGB
  3. ![BM80HSRGB](https://i.imgur.com/AqjEjOi.jpeg)
  5. A tkl, hotswap, in switch RGB keyboard from KPRepublic.
  7. * Keyboard Maintainer: [peepeetee](https://github.com/peepeetee)
  8. * Hardware Supported: BM80HSRGB
  9. * Hardware Availability: [KP Republic](https://kprepublic.com/collections/new-arrival/products/bm80rgb-bm80-rgb-80-hot-swappable-custom-mechanical-keyboard-pcb-programmed-qmk-via-firmware-full-rgb-switch-underglow-type-c)
  11. Make example for this keyboard (after setting up your build environment):
  13.     make kprepublic/bm80hsrgb:default
  15. Flashing example for this keyboard:
  17.     make kprepublic/bm80hsrgb:default:flash
  19. To reset the board into bootloader mode, do one of the following:
  21. * Short the two-pad footprint between the "delete" key and the "end" key while the board is plugged in
  22. * Press the switch labled RST on the back of the PCB, near the MCU, while the board is plugged in
  23. * Hold the Esc key while connecting the USB cable (also erases persistent settings)
  25. All of the RGB matrix effects are enabled by default. To disable specific ones, see [this section](https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects) for more information.
  28. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).