logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1115B)

    

  1. # BM60HSRGB_EC/rev2
  3. A 60% hotswap inswitch RGB keyboard with an encoder from KP Republic. 
  5. * Keyboard Maintainer: [peepeetee](https://github.com/peepeetee)
  6. * Hardware Supported: BM60HSRGB_EC/rev2
  7. * Hardware Availability: [KP Republic](https://kprepublic.com/products/bm60ec-bm60-ec-rgb-60-gh60-hot-swappable-custom-mechanical-keyboard-pcb-programmed-qmk-via-rgb-switch-type-c-rotary-knob)
  9. ## Bootloader
  11. Enter the bootloader in 3 ways:
  13. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  14. * **Physical reset button**: Briefly press the button on the back of the PCB
  15. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
  17. Make example for this keyboard (after setting up your build environment):
  19.     make kprepublic/bm60hsrgb_ec/rev2:default
  21. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).