logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1239B)

    

  1. # BM16A V2
  3. ![bm16v2](https://i.imgur.com/3nr7bSoh.png)
  5. A 16 key macropad, with USB-C and per-key RGB.
  7. * Keyboard Maintainer: QMK Community
  8. * Hardware Supported: BM16A PCB (`BM16V2-ARM`)
  9. * Hardware Availability: [KPrepublic](https://kprepublic.com/collections/bm16/products/bm16a-16-keys-custom-mechanical-keyboard-pcb-plate-programmed-numpad-layouts-qmk-firmware-with-rgb-bottom-underglow-alps-mx)
  11. Make example for this keyboard (after setting up your build environment):
  13.     make kprepublic/bm16v2:default
  15. Flashing example for this keyboard:
  17.     make kprepublic/bm16a/v2:default:flash
  19. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  21. ## Bootloader
  23. Enter the bootloader in 3 ways:
  25. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  26. * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
  27. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available