logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

mcuconf.h (2000B)

    

  1. // based on lib/chibios-contrib/demos/KINETIS/RT-TEENSY3_6/mcuconf.h:
  2. /*
  3.     ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
  5.     Licensed under the Apache License, Version 2.0 (the "License");
  6.     you may not use this file except in compliance with the License.
  7.     You may obtain a copy of the License at
  9.         http://www.apache.org/licenses/LICENSE-2.0
  11.     Unless required by applicable law or agreed to in writing, software
  12.     distributed under the License is distributed on an "AS IS" BASIS,
  13.     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  14.     See the License for the specific language governing permissions and
  15.     limitations under the License.
  16. */
  18. #ifndef _MCUCONF_H_
  19. #define _MCUCONF_H_
  21. #define MK66FX1M0_MCUCONF
  23. /*
  24.  * HAL driver system settings.
  25.  */
  27. /* Select the MCU clocking mode below by enabling the appropriate block. */
  29. /* PEE mode - 180 MHz system clock driving by 16 MHz xtal */
  30. #define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE
  31. //#define KINETIS_PLLCLK_FREQUENCY 180000000UL  // 180 MHz (HSRUN)
  32. #define KINETIS_PLLCLK_FREQUENCY 120000000UL  // 120 MHz (RUN)
  33. #define KINETIS_SYSCLK_FREQUENCY KINETIS_PLLCLK_FREQUENCY
  34. #define KINETIS_BUSCLK_FREQUENCY 60000000UL
  35. //#define KINETIS_FLASHCLK_FREQUENCY 28000000UL  // 28 MHz (HSRUN)
  36. #define KINETIS_FLASHCLK_FREQUENCY 24000000UL  // 24 MHz (RUN)
  38. #if KINETIS_PLLCLK_FREQUENCY == 180000000UL
  39. #    define KINETIS_CLKDIV1_OUTDIV1 1  // -> 0
  40. #    define KINETIS_CLKDIV1_OUTDIV2 3  // -> 2
  41. #    define KINETIS_CLKDIV1_OUTDIV4 7  // -> 6
  42. #else
  43. #    define KINETIS_CLKDIV1_OUTDIV1 1  // -> 0
  44. #    define KINETIS_CLKDIV1_OUTDIV2 2  // -> 1
  45. #    define KINETIS_CLKDIV1_OUTDIV4 5  // -> 4
  46. #endif
  48. /*
  49.  * SERIAL driver system settings.
  50.  */
  51. #define KINETIS_SERIAL_USE_UART4 TRUE
  53. /*
  54.  * USB driver settings
  55.  */
  56. #define KINETIS_USB_USE_USB0 TRUE
  57. #define KINETIS_USB_USB0_IRQ_PRIORITY 5
  59. /*
  60.  * I2C driver settings
  61.  */
  62. #define KINETIS_I2C_USE_I2C0 TRUE
  63. #define KINETIS_I2C_I2C0_PRIORITY 4
  65. #endif /* _MCUCONF_H_ */