logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1113B)

    

  1. # keyten kt60-M
  3. 60% MX PCB with a minimum number of required layouts.
  5. ![kt60-M image](https://i.imgur.com/ZAdGKmQl.jpg)
  7. * Keyboard Maintainer: [keyten](https://github.com/key10iq)
  8. * Hardware Supported: keyten kt60-M
  9. * Hardware Availability: [GB](https://www.reddit.com/r/mechmarket/comments/s4jvsc/gb_kt60m_60_universal_pcb_with_a_minimum_number)
  11. Make example for this keyboard (after setting up your build environment):
  13.     make keyten/kt60_m:default
  14. 	
  15. Flashing example for this keyboard:
  17. 	make keyten/kt60_m:default:flash
  19. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  21. ## Bootloader 
  23. Enter the bootloader in 3 ways:
  25. * Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  26. * Keycode in layout: Press the key mapped to `QK_BOOT` if it is available
  27. * Physical reset button: Press the button on the back of the PCB