logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1160B)

    

  1. # Aperture
  3. Aperture is a 65% keyboard with low height of the first row of switches.
  5. Case designed by [Bizunow](https://github.com/Bizunow) ans PCB designed by [keyten](https://github.com/key10iq).
  7. ![Aperture image](https://i.imgur.com/L4Z9c96l.jpg)
  9. * Keyboard Maintainer: [keyten](https://github.com/key10iq)
  10. * Hardware Supported: Aperture PCB
  11. * Hardware Availability: [GB](https://t.me/gvalchcasciops)
  13. Make example for this keyboard (after setting up your build environment):
  15.     make aperture:default
  16. 	
  17. Flashing example for this keyboard:
  19. 	make aperture:default:flash
  21. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  23. ## Bootloader 
  25. Enter the bootloader in 3 ways:
  27. * Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  28. * Keycode in layout: Press the key mapped to `QK_BOOT` if it is available
  29. * Physical reset button: Press the button on the back of the PCB