logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1065B)

    

  1. # Keygem KG65 RGB V2 
  3. The following is the QMK Firmware for the FJLabs TF65 RGB V2 PCB, a universal tray mount 65% hotswap PCB with per key RGB LED's. 
  5. The PCB will feature:
  6. * Kailh Hotswap sockets
  7. * QMK & VIA compatibility
  8. * Per-Key RGB LED's
  11. * Keyboard Maintainer: Keygem
  12. * Hardware Supported: KG65 RGB V2
  14. Make example for this keyboard (after setting up your build environment):
  16.     make keygem/kg65rgbv2:default
  18. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  20. ## Bootloader
  22. Enter the bootloader in 3 ways:
  24. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  25. * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
  26. * **Keycode in layout**: Press the key mapped to `RESET` if it is available