config.h (1710B)
- /* Copyright 2023 @ Keychron(https://www.keychron.com)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
- #pragma once
- /* key matrix pins */
- #define MATRIX_ROW_PINS { B5, B4, B3, A15, A14, A13 }
- #define MATRIX_COL_PINS { C14, C15, A0, A1, A2, A3, A4, A5, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN }
- /* Pin connected to DS of 74HC595 */
- #define DATA_PIN_74HC595 A7
- /* Pin connected to SH_CP of 74HC595 */
- #define CLOCK_PIN_74HC595 B1
- /* Pin connected to ST_CP of 74HC595 */
- #define LATCH_PIN_74HC595 B0
- /* COL2ROW or ROW2COL */
- #define DIODE_DIRECTION ROW2COL
- /* RGB Matrix Driver Configuration */
- #define SNLED27351_I2C_ADDRESS_1 SNLED27351_I2C_ADDRESS_VDDIO
- #define SNLED27351_I2C_ADDRESS_2 SNLED27351_I2C_ADDRESS_GND
- /* Increase I2C speed to 1000 KHz */
- #define I2C1_TIMINGR_PRESC 0U
- #define I2C1_TIMINGR_SCLDEL 3U
- #define I2C1_TIMINGR_SDADEL 0U
- #define I2C1_TIMINGR_SCLH 15U
- #define I2C1_TIMINGR_SCLL 51U
- #define SNLED27351_PHASE_CHANNEL SNLED27351_SCAN_PHASE_9_CHANNEL
- #define SNLED27351_CURRENT_TUNE { 0x98, 0x98, 0x4A, 0x98, 0x98, 0x4A, 0x98, 0x98, 0x4A, 0x98, 0x98, 0x4A }