logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

config.h (1337B)

    

  1. /* Copyright 2023 @ Keychron(https://www.keychron.com)
  2.  *
  3.  * This program is free software: you can redistribute it and/or modify
  4.  * it under the terms of the GNU General Public License as published by
  5.  * the Free Software Foundation, either version 2 of the License, or
  6.  * (at your option) any later version.
  7.  *
  8.  * This program is distributed in the hope that it will be useful,
  9.  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  10.  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  11.  * GNU General Public License for more details.
  12.  *
  13.  * You should have received a copy of the GNU General Public License
  14.  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  15.  */
  17. #pragma once
  19. /* RGB Matrix Driver Configuration */
  20. #define SNLED27351_I2C_ADDRESS_1 SNLED27351_I2C_ADDRESS_GND
  22. /* Increase I2C speed to 1000 KHz */
  23. #define I2C1_TIMINGR_PRESC 0U
  24. #define I2C1_TIMINGR_SCLDEL 3U
  25. #define I2C1_TIMINGR_SDADEL 0U
  26. #define I2C1_TIMINGR_SCLH 15U
  27. #define I2C1_TIMINGR_SCLL 51U
  29. #define SNLED27351_CURRENT_TUNE \
  30.     { 0x80, 0xFF, 0xFF, 0x80, 0xFF, 0xFF, 0x80, 0xFF, 0xFF, 0x80, 0xFF, 0xFF } // 300mA
  32. /* Encoder Configuration */
  33. #define ENCODER_DEFAULT_POS 0x3
  35. // Needed as the master side could enter slave state during poweron
  36. // of host, due to missing VUSB detection.
  37. #define SPLIT_WATCHDOG_ENABLE