logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1262B)

    

  1. # Keychron C2 Pro V2
  3. ![Keychron C2 Pro](https://i.imgur.com/BQE1tFO.jpg)
  5. A customizable 100% keyboard.
  7. Rev1 is based on STM32L432 and rev2 is based on STM32F402.
  9. * Keyboard Maintainer: [Keychron](https://github.com/keychron)
  10. * Hardware Supported: Keychron C2 Pro
  11. * Hardware Availability: [Keychron C2 Pro QMK/VIA Wired Mechanical Keyboard](https://www.keychron.com/products/keychron-c2-pro-qmk-via-wired-mechanical-keyboard)
  13. Make example for this keyboard (after setting up your build environment):
  15.     make keychron/c2_pro_v2/ansi/rgb:default
  16.     make keychron/c2_pro_v2/ansi/white:default
  18. Flashing example for this keyboard:
  20.     make keychron/c2_pro_v2/ansi/rgb:default:flash
  21.     make keychron/c2_pro_v2/ansi/white:default:flash
  23. ## bootloader
  25. Enter the bootloader in two ways:
  27. * **Bootmagic reset**: Hold down the key located at *K00*, commonly programmed as *Esc* while plugging in the keyboard.
  28. * **Physical reset button**: Briefly press the RESET button under the spacebar.
  30. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).