logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1409B)

    

  1. # 3w6_2040
  3. ![image](https://i.imgur.com/QAL63nyh.jpg)
  5. A split keyboard with 3x5 vertically staggered keys and 3 thumb keys, with support for pimoroni trackball modules on each half.
  7. This version is distinct from keyboards/3w6 and is exclusive to [keycapsss.com](https://keycapsss.com).
  9. * Keyboard Maintainer: [@keyboard-magpie]
  10. * Hardware Supported: On board rp2040 microcontrollers.
  11. * Hardware Availability: [keycapsss.com](https://keycapsss.com)
  13. Make firmware .uf2 for this keyboard (after setting up your build environment):
  15.     qmk compile -kb keycapsss/3w6_2040 -km default
  17. Example of flashing this keyboard:
  19.     qmk flash -kb keycapsss/3w6_2040 -km default (or drag and drop the uf2 from the above command into the mass storage device that appears when in bootloader mode)
  21. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  23. ## Bootloader
  25. Enter the bootloader in 3 ways:
  27. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  28. * **Physical reset button**: Press and hold the button on the front of the PCB when plugging in.
  29. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available