logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1288B)

    

  1. # KBIC65
  3. ![KBIC65 top-down view](https://github.com/b-karl/KBIC65/blob/main/img/photoshoot/full_keyboard_straight_above.jpg)
  5. A 65%/70 key FR4-stack open-source keyboard with some design optimizations for wireless. For more info visit the [KBIC65 website](https://karlb.eu/kbic65/) or the [GitHub repo](https://github.com/b-karl/KBIC65).
  7. * Keyboard Maintainer: [Karl Berggren](https://github.com/b-karl)
  8. * Hardware Supported: [KBIC65](https://github.com/b-karl/KBIC65)
  9. * Hardware Availability: Open-source design [available on GitHub](https://github.com/b-karl/KBIC65)
  11. Firmware and default keymap have been tested using a KBIC65 with an Elite-C rev 4 controller.
  13. ## Build firmware
  15. Make example for this keyboard (after setting up your build environment):
  17. ```bash
  18.  qmk compile -kb karlb/kbic65 -km default
  19. ```
  21. See the [QMK setup documentation](https://docs.qmk.fm/#/newbs_getting_started) to set up the QMK tools. I recommend flashing using
  23. ```bash
  24.  qmk flash -kb karlb/kbic65 -km default
  25. ```
  27. ## Bootloader
  29. Since the keyboard is designed to have an exposed ProMicro the bootloader can always be entered by short circuiting the `RST` and `GND` pins on the ProMicro. If the keyboard is configured with the default keymap, the bootloader can be entered by pressing `R_GUI/FN + B`