logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1037B)

    

  1. # Boaty
  3. ![Boaty](https://i.imgur.com/6LEaYxSh.jpg)
  5. * Keyboard Maintainer: [jels](https://github.com/JoahNelson)
  6. * Hardware Supported: Boaty
  7. * Hardware Availabililty: Limited Group buy from: [jels](https://jels.au)
  9. Make example for this keyboard (after setting up your build environment):
  10.     
  11.     make jels/boaty:default
  12.     
  13. Flashing example for this keyboard:
  15.     make jels/boaty:default:flash
  17. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  19. ## Bootloader
  21. Enter the bootloader in 3 ways:
  23. * **Bootmagic reset**: Hold down the leftmost key (ESC) and plug in the keyboard
  24. * **USBASPLoader**: Press down the BOOT switch and plug in the keyboard
  25. * **Keycode in layout**: Press the key mapped to `RESET` if it is available
  27. * **Exit Bootloader**: To exit the bootloader, press the RESET switch (Left of BOOT).