logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1049B)

    

  1. # Tinny50 RGB Edition
  3. ![Tinny50 RGB Edition](https://i.imgur.com/TMig65zh.jpg)
  5. A 50% RGB PCB designed for the Idyllic Tinny50.
  7. * Keyboard Maintainer: Zykrah
  8. * Hardware Supported: Tinny50 RGB Edition PCB
  9. * Hardware Availability: TBA
  11. Make example for this keyboard (after setting up your build environment):
  13.     make idyllic/tinny50_rgb:default
  15. Flashing example for this keyboard:
  17.     make idyllic/tinny50_rgb:default:flash
  19. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  21. ## Bootloader
  23. Enter the bootloader in 3 ways:
  25. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  26. * **Physical reset button**: Briefly press both the `BOOT` and `RESET` buttons at the same time
  27. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available