logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1083B)

    

  1. # Pizza Pad PCB
  3. ![Pizza Pad PCB](https://i.imgur.com/eJLuaZY.jpg)
  5. A 3x3 PCB designed for the Idyllic Pretty Pad.
  7. * Keyboard Maintainer: Zykrah
  8. * Hardware Supported: Pizza Pad PCB (using a SEEED XIAO RP2040)
  9. * Hardware Availability: [Mechstock](https://mechstock.com.au/)
  11. Make example for this keyboard (after setting up your build environment):
  13.     make idyllic/pizzapad:default
  15. Flashing example for this keyboard:
  17.     make idyllic/pizzapad:default:flash
  19. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  21. ## Bootloader
  23. Enter the bootloader in 3 ways:
  25. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  26. * **Physical reset button**: Briefly press both the `BOOT` and `RESET` buttons at the same time
  27. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available