logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1434B)

    

  1. # Sweeq
  3. ![sweeq](https://i.imgur.com/TGSyHHxh.png)
  5. *Sweeq is a Ferris Sweep clone that uses diodes, instead of the latter's direct pin matrix.*
  7. The primary goal is to free up the SDA/SCL pins so they can be used by auxiliary devices such as a trackball, trackpoint or an OLED screen.
  9. Other than the diode changes and the ability to use hotswap sockets, this keyboard is identical to the original Sweep.
  11. * Keyboard Maintainer: [@idank](https://github.com/idank)
  12. * Hardware Supported: [sweeq](https://github.com/idank/keyboards/tree/main/sweeq)
  13. * Hardware Availability: *[holykeebs](https://holykeebs.com)*
  15. Make example for this keyboard (after setting up your build environment):
  17.     make idank/sweeq:default
  19. Flashing example for this keyboard:
  21.     make idank/sweeq:default:flash
  23. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  25. ## Bootloader
  27. Enter the bootloader in 3 ways:
  29. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  30. * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
  31. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available