logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1245B)

    

  1. # Span
  3. *Span is a 3x5+3 split keyboard, with 2u, 1.5u, 1u thumb clusters.*
  5. The keyboard layout Span uses is derived from GergoPlex, a keyboard that was originally available on gboards.ca
  6. (now defunct).
  8. * Keyboard Maintainer: [@idank](https://github.com/idank)
  9. * Hardware Supported: [spankbd](https://github.com/idank/spankbd)
  10. * Hardware Availability: *[holykeebs](https://holykeebs.com)*
  12. Make example for this keyboard (after setting up your build environment):
  14.     make idank/spankbd:default
  16. Flashing example for this keyboard:
  18.     make idank/spankbd:default:flash
  20. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  22. ## Bootloader
  24. Enter the bootloader in 3 ways:
  26. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard.
  27. * **Physical reset button**: Briefly press the button on the front of the PCB. Double tap for pro micro, 1 second press for Sea Picro / RP2040s.
  28. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available.