logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1309B)

    

  1. # ctrl-M
  3. ![ctrl-M PCB](https://i.imgur.com/wUqY8N3.jpeg)
  5. This is a configuration of QMK intended to be used with the [ctrl-M controller](https://github.com/nuess0r/ctrl-M). Many thanks to iw0rm3r, ashpil, mschwingen and all QMK contributors for working on similar projects and providing the foundation for this!
  7. * Keyboard Maintainer: [nuess0r](https://github.com/nuess0r)
  8. * Hardware Supported: [ctrl-M](https://github.com/nuess0r/ctrl-m)
  9. * Hardware Availability: [tindie shop](https://www.tindie.com/products/brain4free/ctrl-m/)
  11. Example how to compile for this keyboard (after setting up your build environment):
  13.     make ibm/model_m/ctrl_m:default
  15. Flashing example for this keyboard:
  17.     make ibm/model_m/ctrl_m:default:flash
  19. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  21. ## Bootloader
  23. Enter the bootloader in 3 ways:
  25. * **Bootmagic reset**: Hold down the Escape key and plug in the keyboard
  26. * **Physical reset button**: Briefly press the button on the back of the PCB and plug in the keyboard
  27. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available