logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1115B)

    

  1. # h88_g2
  3. [h88_g2](https://i.imgur.com/t7chDf8h.png)
  5. New generation of the h88 keyboard PCB platform with an STM32 microcontroller.
  7. * Keyboard Maintainer: [Josh Hinnebusch](https://github.com/hineybush)
  8. * Hardware Supported: H88 G2 PCB w/ STM32F072 MCU
  9. * Hardware Availability: [hineybush.com](https://hineybush.com)
  11. Make example for this keyboard (after setting up your build environment):
  13.     make hineybush/h88_g2:default
  15. Flashing example for this keyboard:
  17.     make hineybush/h88_g2:default:flash
  19. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  21. ## Bootloader
  23. Enter the bootloader in 3 ways:
  25. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix Escape and plug in the keyboard.
  26. * **Physical reset button**: Press the button on the back of the PCB for a minumum of 3 seconds, then release.
  27. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available.