logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1388B)

    

  1. # Hardware Abstraction Handwire
  3. ![handwire](https://i.imgur.com/PK5HfM3h.jpg)
  5. A hotswap 60% keyboard with an arrow key cluster. Board features support for an OLED screen, push pull solenoid, and an active buzzer. 
  7. * Keyboard Maintainer: [Andy Tsai](https://github.com/cgmandy)
  8. * Hardware Supported: ATMEGA32U4, Push-Pull Solenoid, Active Buzzer, SSD1306 128x32 OLED
  9. * Hardware Availability: https://hardwareabstraction.com
  11. Make example for this keyboard (after setting up your build environment):
  13.     make hardwareabstraction/handwire:default
  15. Flashing example for this keyboard:
  17.     make hardwareabstraction/handwire:default:flash
  19. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  21. ## Bootloader
  23. Enter the bootloader in 3 ways:
  25. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  26. * **Physical reset button**: Briefly press the button on the top left side of the PCB. You can alternatively short the two pads vertically with a pair of tweezers. 
  27. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. This can be configured in VIA or on the QMK configurator.