logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1396B)

    

  1. # ziyoulang_k3_mod
  3. ![ziyoulang_k3_mod](https://i.imgur.com/z9mUvIoh.jpg)
  6. This base keyboard has  SX83099 IC causes some problems. I needed QMK as an alternative, especially since the controller freezes when the backlight is off.
  8. * Keyboard Maintainer: [Coom](https://github.com/coomstoolbox)
  9. * Hardware Supported: Ziyoulang K3,Blue Pill
  10. * Hardware Availability: [Base Keyboard](https://www.aliexpress.com/item/1005005458088199.html), [Blue Pill Board](https://www.aliexpress.com/item/32812837487.html)
  12. Make example for this keyboard (after setting up your build environment):
  14.     make handwired/ziyoulang_k3_mod:default
  16. Flashing example for this keyboard:
  18.     make handwired/ziyoulang_k3_mod:default:flash
  20. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  22. ## Requires hand wired
  24. [KiCAD wiring diagram](https://github.com/coomstoolbox/ZK3-BP-MOD-wiring-diagram)
  26. ![explanation](https://i.imgur.com/thGIdOth.png)
  28. ## Bootloader
  30. Enter the bootloader in 2 ways:
  32. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  33. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available