logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1163B)

    

  1. # Yoda Distro
  3. ![YodaDistro](https://i.imgur.com/W2xnKjF.jpeg)
  5. Scratch made direct wire pin 8-Key (4x2) Macro Pad using a Raspberry Pi Pico (2040).
  7. * Keyboard Maintainer: [YodaDistro](https://github.com/YodaDistro)
  8. * Hardware Supported: Raspberry Pi Pico (2040)
  9. * Hardware Availability: 3D Printed Design (https://github.com/YodaDistro/MacroPad)
  11. Make example for this keyboard (after setting up your build environment):
  13.     make handwired/yodadistro/macro:default
  14.     
  15. Flashing example for this keyboard:
  17.     make handwired/yodadistro/macro:flash
  19. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs)
  21. ## Bootloader
  23. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  24. * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
  25. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available