logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1285B)

    

  1. # Drashna's Blackpill Tractyl Manuform (5x6) with a right side trackball
  4. * Split Hand Pin, using PC14
  5. * Full Duplex Serial/USART using PA9 and PA10 on USART1
  6. * DAC Audio using PA4 and PA5
  7. * PWM RGB using PA6 TIM3
  8. * pmw3360 sensor using PA5-PA7 on SPI2, with B as CS pin
  9. * 8KB SPI EEPROM chip sharing PB13-PB15 on SPI1 with PB9 as CS pin
  10. * Encoder using PA7 and PA8
  11. * SSD1306 OLED display (128x64) using PB6 and PB7 on I2C1
  13. * Keyboard Maintainer: [Drashna Jael're](https://github.com/drashna)
  14. * Hardware Supported: [Design files](https://gitlab.com/keyboards1/dm_r_track/-/tree/master/boolean), [WeAct BlackPill (F411)](https://github.com/WeActStudio/WeActStudio.MiniSTM32F4x1), [PMW3360 Optical Sensor](https://www.tindie.com/products/jkicklighter/pmw3360-motion-sensor/)
  16. Make example for this keyboard (after setting up your build environment):
  18.     make handwired/tractyl_manuform/5x6_right/f411:default
  20. Flashing example for this keyboard:
  22.     make handwired/tractyl_manuform/5x6_right/f411:default:flash
  24. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).