logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

config.h (3266B)

    

  1. /*
  2. Copyright 2012 Jun Wako <wakojun@gmail.com>
  3. Copyright 2015 Jack Humbert
  5. This program is free software: you can redistribute it and/or modify
  6. it under the terms of the GNU General Public License as published by
  7. the Free Software Foundation, either version 2 of the License, or
  8. (at your option) any later version.
  10. This program is distributed in the hope that it will be useful,
  11. but WITHOUT ANY WARRANTY; without even the implied warranty of
  12. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13. GNU General Public License for more details.
  15. You should have received a copy of the GNU General Public License
  16. along with this program.  If not, see <http://www.gnu.org/licenses/>.
  17. */
  19. #pragma once
  21. // #define USB_VBUS_PIN        B10
  23. // WS2812 RGB LED strip input and number of LEDs
  24. #define WS2812_PWM_DRIVER   PWMD3  // default: PWMD2
  25. #define WS2812_PWM_CHANNEL  1      // default: 2
  26. #define WS2812_PWM_PAL_MODE 2      // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
  27. //#define WS2812_PWM_COMPLEMENTARY_OUTPUT // Define for a complementary timer output (TIMx_CHyN); omit for a normal timer output (TIMx_CHy).
  28. // #define WS2812_PWM_DMA_STREAM   STM32_DMA1_STREAM3  // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
  29. #define WS2812_PWM_DMA_CHANNEL  3  // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
  31. #define DEBUG_LED_PIN C13
  33. /* Audio config */
  34. #define AUDIO_PIN     A5
  35. #define AUDIO_PIN_ALT A4
  36. #define AUDIO_PIN_ALT_AS_NEGATIVE
  38. /* serial.c configuration for split keyboard */
  39. #define SERIAL_USART_FULL_DUPLEX  // Enable full duplex operation mode.
  40. #define SERIAL_USART_TX_PIN      A9
  41. #define SERIAL_USART_RX_PIN      A10
  42. #define SERIAL_USART_DRIVER      SD1
  43. #define SERIAL_USART_TX_PAL_MODE 7    // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
  44. #define SERIAL_USART_RX_PAL_MODE 7    // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
  45. #define SERIAL_USART_TIMEOUT     100  // USART driver timeout. default 100
  47. /* i2c config for oleds */
  48. #define I2C_DRIVER               I2CD1
  49. #define I2C1_SCL_PIN             B6
  50. #define I2C1_SDA_PIN             B7
  51. #define I2C1_SCL_PAL_MODE        4
  52. #define I2C1_SDA_PAL_MODE        4
  53. #define I2C1_CLOCK_SPEED         400000
  55. /* spi config for eeprom and pmw3360 sensor */
  56. #define SPI_DRIVER                           SPID2
  57. #define SPI_SCK_PIN                          B13
  58. #define SPI_SCK_PAL_MODE                     5
  59. #define SPI_MOSI_PIN                         B15
  60. #define SPI_MOSI_PAL_MODE                    5
  61. #define SPI_MISO_PIN                         B14
  62. #define SPI_MISO_PAL_MODE                    5
  64. /* eeprom config */
  65. #define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN B8
  66. #define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR    8
  67. // #define EXTERNAL_EEPROM_BYTE_COUNT           8196
  68. // #define EXTERNAL_EEPROM_PAGE_SIZE            32
  69. // #define EXTERNAL_EEPROM_ADDRESS_SIZE         2
  70. // #define DEBUG_EEPROM_OUTPUT
  72. /* pmw3360 config  */
  73. #define PMW33XX_CS_PIN                       B9
  74. #define PMW33XX_SPI_DIVISOR                  8