logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1048B)

    

  1. # Stream Cheap
  3. An ortholinear macropad, available in 2x3, 2x4, and 2x5 sizes.
  5. Hardware:
  6.   * 3d printed switch plate
  7.   * 6-10 key switches
  8.   * 3d printed case
  9.   * Handwired in Direct Pins mode (i.e. all switches share a common GND and are wired to their own pin)
  10.   * Uses a Pro Micro
  11.   * Includes a reset switch accessible by a hole on the bottom
  13. * Keyboard Maintainer: [hartk1213](https://github.com/hartk1213)
  14. * Hardware Supported: Pro Micro
  15. * Hardware Availability: [Thingiverse](https://www.thingiverse.com/thing:4497991)
  17. Make example for this keyboard (after setting up your build environment):
  19.     make handwired/stream_cheap/2x3:default
  20.     make handwired/stream_cheap/2x4:default
  21.     make handwired/stream_cheap/2x4:via
  22.     make handwired/stream_cheap/2x5:default
  24. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).