readme.md (435B)
- # Teensy 2.0 splittest
- To trigger keypress, short together pins *F5* and *F7*
- ## Wiring
- - Add switches to both Teensy 2s across F5 and F7 pins
- - Add pull-up resistor to left side between VCC and F0
- - Add pull-down resistors to right side between GND and F0
- - Connect the following pins on both sides together: D0, D1, GND, VCC
- - Add I2C 4.7kOhm resistors between D0 and VCC, and D1 and VCC
- - Wire Di of RGB strip for each half to D3