logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1270B)

    

  1. # ScottoSplit
  3. ![ScottoSplit](https://i.imgur.com/u6rSzyHh.jpg)
  5. A 36-key split column-staggered ortholinear keyboard that uses a single MCU and VGA cable to connect the halves. Case files available [here](https://github.com/joe-scotto/scottokeebs).
  7. *   Keyboard Maintainer: [Joe Scotto](https://github.com/joe-scotto)
  8. *   Hardware Supported: ATmega32U4
  9. *   Hardware Availability: [Amazon](https://amazon.com)
  11. Make example for this keyboard (after setting up your build environment):
  13.     make handwired/jscotto/scottosplit:default
  15. Flashing example for this keyboard:
  17.     make handwired/jscotto/scottosplit:default:flash
  19. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  21. ## Bootloader
  23. Enter the bootloader in 3 ways:
  25. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  26. * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
  27. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available