logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1484B)

    

  1. # meck_tkl
  3. ![meck_tkl](https://i.imgur.com/eIpQTjQ.jpeg)
  5. A standard tenkeyless keyboard, using STM32 Blackpill.
  7. * Keyboard Maintainer: [Gabriel Kim](https://github.com/gabrielkim13)
  8. * Hardware Supported: Blackpill F401
  9. * Hardware Availability: [Thingiverse: Mechanical Keyboard - MECH - TKL](https://www.thingiverse.com/thing:4225961)
  11. Make example for this keyboard (after setting up your build environment):
  13.     make handwired/meck_tkl:default
  15. Flashing example for this keyboard:
  17.     make handwired/meck_tkl:default:flash
  19. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  21. ## Bootloader
  23. Enter the bootloader in 3 ways:
  25. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  26. * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
  27. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
  29. ## Wiring instructions
  31. - On Blackpill boards, **avoid** using the following pins, since they will cause either USB enumeration or the DFU bootloader to not work correctly:
  32.   - **USB-related pins:** `PA10`, `PA11`, `PA12`
  33.   - **BOOT1 pin:** `PB2`
  35. Sample wiring:
  37. ![wiring](https://i.imgur.com/jIDmsNy.jpg)