logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1226B)

    

  1. # ergosplit44
  3. ![ergosplit44](https://i.imgur.com/RhRIe2ah.png)
  5. This is a handdwired split 44 key keyboard. the two sides are connectd via a custom 2x8P pin header cable.
  7. * Keyboard Maintainer: [Marek128b](https://github.com/Marek128b)
  8. * Hardware Supported: WaveShare RP2040-Zero
  9. * Hardware Availability: [Open Source](https://github.com/Marek128b/Split40)
  11. Make example for this keyboard (after setting up your build environment):
  13.     make handwired/marek128b/ergosplit44:default
  15. Flashing example for this keyboard:
  17.     make handwired/marek128b/ergosplit44:default:flash
  19. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  21. ## Bootloader
  23. Enter the bootloader in 3 ways:
  25. * **Bootmagic reset**: Hold down the top left key and plug in the keyboard.
  26. * **Physical reset button**: Hold down the `BOOT` button on the RP2040-Zero, then press the `RESET` button.
  27. * **Keycode in layout**: There is no key mapped to `QK_BOOT` in the pre-created keymaps, but you may assign this key in any keymaps you create.