logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1106B)

    

  1. # Elrgo S Split Keyboard
  3. This is a fork of the VOID Ergo S with QMK Configurator support.
  5. Elrgo S uses 2x Arduino Pro Micro (ATmega32U4) with 3D printed case.
  6.  
  7. [Building guide, models for 3D printing](https://github.com/Eloren1/Elrgo_S)
  9. * Keyboard Maintainer: [Eloren](https://github.com/Eloren1)
  10. * Hardware Supported: Arduino Pro Micro
  11. * Hardware Availability: [Open Source](https://github.com/Eloren1/Elrgo_S)
  13. Make example for this keyboard (after setting up your build environment):
  15.     make handwired/elrgo_s:default
  17. Flashing example for this keyboard:
  19.     make handwired/elrgo_s:default:flash
  21. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  23. ## Bootloader
  25. Enter the bootloader in 2 ways:
  27. * **Physical reset button**: Briefly press the button through the hole on the left side of the case.
  28. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available