logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1316B)

    

  1. # DMOTE
  3. ![DMOTE](https://i.imgur.com/JYkB6LBh.jpg)
  5. The “**D**actyl-**M**anuForm: **O**pposable **T**humb **E**dition” is made from a Clojure
  6. application maintained [here](https://github.com/veikman/dactyl-keyboard).
  7. The application supports varied physical layouts and therefore matrices.
  8. This physical variability is its main feature; its QMK firmware is ordinary.
  10. * Keyboard Maintainer: [Viktor Eikman](https://github.com/veikman/)
  11. * Hardware Supported: Pro Micro and clones
  13. Make example for this keyboard (after setting up your build environment):
  15.     make handwired/dmote:default
  17. Flashing example for this keyboard:
  19.     make handwired/dmote:default:flash
  21. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  23. ## Bootloader
  25. Enter the bootloader in 3 ways:
  27. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  28. * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
  29. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available