logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1673B)

    

  1. # Dactyl Maximus
  3. ![KeycapLess](https://i.imgur.com/OJs3bkWh.jpg)  
  4. *Thanks to [unit-5370](https://github.com/unit-5370) for image*
  6. The largest [Dactyl](/keyboards/handwired/dactyl/) variation available from a Dactyl generator. This variation is electronically more similar to the [Dactyl (Pro Micro)](/keyboards/handwired/dactyl_promicro/) as it requires two micro controllers, one per half, instead of the *Dactyl's* original implementation of one microcontroller and an I/O expander.
  8. * Keyboard Maintainer: [Duncan Sutherland](https://github.com/dunk2k)
  9. * Hardware Supported: Pro Micro controller, of clone of
  10. * Case Files: [Dactyl Generator](https://ryanis.cool/dactyl/#original)
  12. 'Keys' settings for *Dactyl Generator* link:
  13. * Number of Columns: 7 
  14. * Use Number Row: true
  15. * Use Bottom Row: true
  16. * Thumb Key Count: 8
  18. Make example for this keyboard (after setting up your build environment):
  20.     make handwired/dactyl_maximus:default
  22. Flashing example for this keyboard:
  24.     make handwired/dactyl_maximus:default:flash
  26. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  28. ## Bootloader
  30. Enter the bootloader in 3 ways:
  32. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  33. * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
  34. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available