config.h (1811B)
- /* Copyright 2021 QMK
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
- #pragma once
- // in col2row col is input, and row is output
- // #define SPLIT_HAND_MATRIX_GRID A10, A4
- // 68kohm
- /* connection */
- #define SERIAL_USART_FULL_DUPLEX // Enable full duplex operation mode.
- #define SERIAL_USART_RX_PIN B7 // USART RX pin
- #define SERIAL_USART_TX_PIN B6 // USART TX pin
- #define SELECT_SOFT_SERIAL_SPEED 1 // or 0, 2, 3, 4, 5
- // 0: 460800 baud
- // 1: 230400 baud (default)
- // 2: 115200 baud
- // 3: 57600 baud
- // 4: 38400 baud
- // 5: 19200 baud
- #define SERIAL_USART_DRIVER SD1 // USART driver of TX and RX pin. default: SD1
- #define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
- #define SERIAL_USART_RX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
- #define SERIAL_USART_TIMEOUT 20 // USART driver timeout. default 20