logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1255B)

    

  1. # Cans12erV2
  2. ![Cans12erV2](https://i.imgur.com/3fkbydJ.png)
  4. New version of my 12-key orthogonal macro keypad with hot swappable keyswitch support and an encoder knob.
  6. * Keyboard Maintainer: [Can Baytok](https://github.com/canbaytok)
  7. * Build Instructions: [Github](https://github.com/canbaytok/Cans12erV2)
  8. * Hardware Supported: RP2040 Zero
  9. * Hardware Availability: amazon, aliexpress (RP2040 Zero clones work too)
  11. Make example for this keyboard (after setting up your build environment):
  13.     make handwired/cans12erv2:default
  15. Flashing example for this keyboard:
  17.     make handwired/cans12erv2:default:flash
  19. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  21. ## Bootloader
  23. Enter the bootloader in 3 ways:
  25. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  26. * **Physical reset button**: Quickly double press the reset button on the PCB to make the RP2040 boot into its uf2 mode
  27. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available